Flyer Gotour 6 - 5.5 Battery Charging Procedures

20
battery performance. Read and adhere
to the operating instructions for the
charger when loading the battery.
Warning! If your E-bike has two batteries
(DualBattery), When charging devices on
the vehicle, only use one charger.
The battery can at any time be charged outside
or installed in the bicycle without reducing its life
span. Interrupting the charging process does not
damage the battery. The battery is equipped with
a temperature monitor that permits charging only
within a temperature range of 0 °C to 40 °C. Three
of the charging status indicator LEDs will ash
when the battery is outside the charging temper
-
ature range A3.
Separate the battery from the charger and wait
until it has reached operating temperature. Only
reconnect the charger when it has reached the
permitted operating temperature.
The charging time increases when the
battery temperature is very low.
• Prevent extreme overheating due to
externale󰀨ectsoroverloading.
• Only use the battery with your FLYER.
• Never use a damaged battery. If you
discover cracks, deformation of the
housing or leaks, stop using the bat
-
tery and have your FLYER checked
by a specialist retailer
. Damaged bat-
teries must not be posted.
•
In cold weather, only insert the battery
shortly before beginning riding. The
lighting function will still continue for
approx.one hour after thebatteryis
empty. In cold weather, only insert the
battery shortly before
A21
A26
A25
A29
A27
Donotchargeadamagedbatteryand
do not use it.
Contact an authorised
FLYER bicycle dealer.
5.5 Loadingthebattery
Safety warning for the battery charger:
The name plate on the charger refers to
warning notes and other safety informa-
tion in connection with handling the
charger
. Be sure to read this before use.
You should also familiarise yourself with
all the information and instructions con
-
tained in the separate operating instruc-
tions for the battery and the charger.
Do not connect the charger to the mains
socket immediately after a sudden tem-
perature change from cold to warm. It is
possible
that condensed water has col-
lected on the contacts and this will lead
to
a short circuit. Do not connect the bat-
tery to the charger immediately after a
sudden temperature change from cold to
warm.
Wait until both devices have
reached room temperature before con
-
necting the charger or the battery. Al-
ways charge and store the battery and
the charger in a dry and clean environ-
ment. Only charge and store the battery
and
charger in a dry indoor space and
keepthemawayfromhotandammable
objects.
Useonly the original Bosch charger
suppliedalongwithyourE-bike. Only
this charger is designed for the lithi-
um-ion battery used on your E-bike.
The battery is supplied partially charged.
Completely charge the battery using the
chargerbeforetherstridetoensurefull