FS-100: Using with a Computer
94 FS-100 Portable DTE Recorder
Step 9: Locate and select the FS-100 under Media Drive(s).
Step 10: Verify that Master Clips is checked and press
OK. The
Media Tools Window, similar to the following, appears:
Step 11: Create a new bin (select
File -> New Bin) or open an
existing bin in Avid.
Step 12: Select all items in the Media Tools window (select
Edit>
Select All).
Step 13: Drag the contents of the Media Tools Window into the bin.
It is now possible to use these clips in the Avid timeline.
If Drive Does Not Appear
If the drive does not appear, check to make sure that the
OMFI MediaFiles folder was created correctly with proper
case and spacing.In addition, verify that the drive is properly
connected and recognized by the computer. Under
Project(s), select All Projects (This highlights all items in
the Project(s) window).
To Next Page
Loading...
Need help?
General
