Focus Firestore FS-100 - Upgrade Errors

FS-100 Functions
FS-100 Portable DTE Recorder 75
Step 9: Up on successful completion of the upgrade, the FS-100 displays
the message:
Step 10: Hold down the
STOP / POWER OFF button until the FS-100
shuts down.
Step 11: Power up the FS-100.
Upgrade Errors
If the upgrade fails, the FS-100 displays one of the following messages:
Verify that the update is for the model of FS-100 it is being installed on.
An update is not cross-platform and must be installed on the model for
which it is intended.
To find the specific model of a FS-100 go to the SETUP screen
and then version (
V 1.0.0), refer to Setup Screens on page 52.
UPGRADE
COMPLETE
PLEASE RESTART
UPGRADE ERROR
WRONG PRODUCT
ID
EXIT