Focus Firestore FS-100 - Transport Control Operations

Quickstart
8 FS-100 Portable DTE Recorder
Transport Control Buttons
Use these buttons to control FS-100 playback and record
functions. You usually operate these transport buttons while on
the HOME Screen.
Record 
Press this button once when the FS-100 is in
Stop mode to put the FS-
100 into
REC-PAUSE. Press it again to start recording. Pressing the
Record button while recording, causes the current clip to close and a
new clip is created without dropping any frames. This button is the only
button that has a red legend on the front panel.
Back Search
WW
Press this button to play video at speeds different than real-time. Refer
to the note in the Forward Search section.
Play
X
Press this button to start playback of the selected clip.
Forward Search
XX
Press this button to play video at speeds different than real-time.
Back
Search
Forward
Search
Back
Index
Forward
Index
STOP
Power Off
Record
Play