FS-100: Using with a Computer
FS-100 Portable DTE Recorder 97
Dismounting the FS-100 (Macintosh)
When finished working with the FS-100 and the Macintosh it is
necessary to dismount the unit from the system.
To dismount the FS-100 from a Mac:
Step 1: Select the FS-100 on the computer's desktop. It is marked with a
PC symbol.
Step 2: Drag the drive into the trash or use the eject button. This
dismounts the particular disk drive.
Step 3: It is now safe to remove the FS-100.
Dismount FS-100 Before Powering Off
It is important to dismount the FS-100 from the Mac system
BEFORE powering down the FS-100.
Short-cut for Two-Button Mouse
If the Macintosh is equipped with a two-button mouse, the following shortcut is
possible:
Right click the FS-100 icon on the desk top.
Select the Eject function from the pop-up menu.
To Next Page
Loading...
