Focus Firestore FS-100 - Set Time

Quickstart
FS-100 Portable DTE Recorder 27
Step 5: Use the Down navigation button to select the time and press the
Right navigation button. The following screen appears:
Step 6: Use the
Up and Down navigation buttons to change the
highlighted value. Use the Right and Left navigation buttons to
highlight the Hour, Minute, and Second. (Time is indicated in
24hr. mode.)
Step 7: Press the right-most Function button indicated as
BACK on the
screen. The new date appears on the Setup Screen.
The Time and Date are now set.
Step 8: Press the
Left navigation button followed by the Select button to
return to the beginning screen.
For more information on the Setup function, refer to the section,
Setup Screens on page 52.
SET TIME
11 : 21 : 13
HH : MM : SS
BACK