Quickstart
FS-100 Portable DTE Recorder 7
Power On Button
The Power ON button provides two functions.
•Power ON
Turn on the FS-100.
• Reset FS-100
• FS-100 first must be powered on.
• Hold down the
Power On button for two seconds.
•Power OFF
Hold down the OFF/STOP button for three (3) seconds.
During power off, the FS-100 beeps, indicating that it is
turning off.
Navigation Buttons
Use these buttons to navigate through the FS-100 menus. The
navigation buttons are
Left, Right, Up, Down, and Select.
Alarm OFF
If the Alarm feature is set to OFF, then the power-down sequence
occurs silently.
To Next Page
Loading...
