Quickstart
FS-100 Portable DTE Recorder 25
Select a DV File Format
The DV file formats displayed depend on the recorder mode selected
in the previous step, for example
DVCPRO/DV REC results in the
following:
Step 1: Use the Up and Down navigation buttons to select the DV file
format that supports the preferred NLE system. A dash mark to
the left of a list item indicates that it is the current selection. The
default value is AVI Type 2.
Step 2: Press the center
Select button on the navigation buttons.
Step 3: Press the
Left button to return to the menu title.
Step 4: Press the
Right button once and advance to the SETUP screen.
DV24p and PAL 25P Modes
24p modes are only for use with camcorder's that are capable of
DV-24p Advanced mode.
PAL 25P camcorders require no special 25P DV format
Check www.FireStore,com for supported Applications
For a complete and up-to-date list of supported applications and
their associated formats, visit the website:
http://www.firestore.com
FS-100 Stores Multiple Recorder Mode/DV File Format Combinations
FS-100 stores a unique file format setting for each recorder mode in the HDD
MODE menu. This makes it possible to record different file types on a stream by
stream basis; as an example, for DVCPROHD REC mode the DV FORMAT
could be P2, while for DVCPRO/DV REC mode the DV FORMAT is AVI TYPE2.
DV FORMATS
RAW DV
-AVI TYPE1
AVI TYPE2
CANOPUS AVI
To Next Page
Loading...
