63
MR-8HD/CD Owner’s Manual (Track bouncing)
Track bouncing
This chapter describes track bouncing which is an important func-
tion in the recording process.
The track bouncing mixes several tracks and records onto other
two tracks. By using this function, you can record more sound
materials to the MR-8HD/CD tracks.
Three track bouncing modes are available:
(1) Bouncing tracks 1 through 4 to tracks 5/6.
(2) Bouncing tracks 1 through 6 to tracks 7/8
(3) Bouncing tracks 1 through 8 to tracks 7/8 of a new song.
In any mode, you can apply a reverb (or delay) to tracks 1 through
4 when bouncing to two tracks in stereo. Furthermore, you can
apply the mastering effect to the mixed signals.
You can also execute track bouncing while mixing sound sources
from inputs A through D.
To Next Page
Loading...
