79
MR-8HD/CD Owner’s Manual (Rhythm guide function)
4) Rotate the [MENU/ENTER] knob to select
"---Bar -> ---", and press the [MENU/ENTER] knob.
The display now shows the screen for setting
the new time signature event, where "
Back"
is highlighted.
Bar 1 through bar 3: 4/4
Bar 4 through bar 7: 3/4
Bar 8 through bar 11: 4/4
Bar 12 through bar 15: 5/8
Bar 16 through the last bar: 3/4
5) Rotate the [MENU/ENTER] knob to select
"Bar = 2Bar", and press the [MENU/ENTER] knob.
"2Bar" starts flashing and you can now set the
bar number.
6) Rotate the [MENU/ENTER] knob to enter the
desired bar number, and press the
[MENU/ENTER] knob.
In this procedure example, enter "4Bar".
The display returns to the previous screen.
7) Rotate the [MENU/ENTER] knob to select
"Sig. = 4/4", and press the [MENU/ENTER] knob.
"4/4" starts flashing and you can now set the
time signature.
8) Rotate the [MENU/ENTER] knob to select the
desired time signature, and press the
[MENU/ENTER] knob.
In this procedure example, enter "3/4".
The display returns to the previous screen.
9) Rotate the [MENU/ENTER] knob to select
"[ENTER]" at the bottom, and press the
[MENU/ENTER] knob.
The new time signature event is set and the
display shows the screen as below.
In this condition, the song is played in 4/4 from
bar 1 to bar 3 and in 3/4 from bar 4.
Repeat steps 5 through 9 until creating all nec-
essary events.
To Next Page
Loading...
