Fractal Audio FX8 - Configure True Bypass; Per Scene Relay States

34
6 : PRESET CONFIGURATION
The Cong page contains parameters to set up RELAYS and MIDI per scene.
Every scene can set the state of both relays (to switch the channels of a connected amplier for instance).
For more on using scenes to operate a RELAY, see “To Set Relay States For a Scene...” on page 37.
PER SCENE MIDI MESSAGES
Every scene of every preset can trigger the transmission of a dierent MIDI PROGRAM CHANGE MESSAGE
on its own MIDI CHANNEL. MIDI Program changes are transmitted at the MIDI OUT port of the FX8.
Use this feature to have the FX8 operate the functions of a MIDI-switched amplier, another processor, or a
connected Fractal Audio Systems Axe-FX.
For more on how to program a scene to send MIDI messages, please see
“To Set The MIDI Program Change Message For a Scene...” on page 37.
PER SCENE RELAY STATES
The Cong page BYPASS parameter congures the current preset with one of three types of True Bypass.
You can bypass “PRE” only, “POST” only, or “ALL” (both PRE and POST). See Section 8 for more on this.
CONFIGURE TRUE BYPASS