Fractal Audio FX8 - Automatic True Bypass

40
8 : TRUE BYPASS
Automatic True Bypass provides the option to engage True Bypass automatically when all eects in the PRE
or POST chain have been bypassed or removed*. It works individually on each chain, so an Automatic True
Bypass of the PRE chain does not also aect the POST chain (and vice versa).
This feature is either ON or OFF; you can’t enable it for PRE and have it disabled on POST (and vice versa).
Automatic True Bypass defeats ALL DSP eects. Eect tails STOP. Pad, Headroom, and Level settings are
bypassed. The buered signal is routed directly from the INs to the OUTs.
*All eects are also considered “removed” if the PRE/POST conguration shows a “0”.
WHEN AUTOMATIC TRUE BYPASS IS ON:
1. When all PRE eects are removed or bypassed—either manually, or by a SCENE—
AUTO TRUE BYPASS will engage for the PRE chain.
2. When all POST eects are removed or bypassed—either manually, or by a SCENE—
AUTO TRUE BYPASS will engage for the POST chain.
TO ENABLE/DISABLE AUTO TRUE BYPASS:
1. Press the SETUP button.
2. Press #3 to enter the GLOBAL menu.
3. Use the NAV and VALUE knobs to change AUTO TRUE BYPASS to “ON” or “OFF”.
AUTOMATIC TRUE BYPASS