Freescale Semiconductor PE Micro Cyclone Pro - Page 39

Cyclone PRO User Manual 33
CYCLONE PRO
Figure 5-3: ColdFire V1 Class Settings
5.1.1.2 HC9(S)12(X)
The user may configure the Cyclone PRO to operate on a HC9(S)12(X) target
by selecting HC9(S)12(X) from the Specify Target Architecture drop-down
menu.
Alternatively, the user may select the HC9(S)12(X) target through the File
menu.
Figure 5-4 shows the HC9(S)12(X) specification configuration.