Fronius Ohmpilot - Contents

Contents
Safety rules 5
Explanation of safety notices 5
General 5
Environmental conditions 6
Qualified personnel 6
EMC measures 6
Data security 6
Copyright 6
General information 7
General 9
Intended use 9
System components required 9
Integrating the Fronius Smart Meter 9
Description of the device 9
System design 10
Warning notices on the device 11
Control elements and connections 12
Indications/controls on the device 12
Connection area 13
Selection of heater 15
1-phase heater 15
3-phase heater 15
Example for calculating the charging time 15
Installation and commissioning 17
Choice of location and installation position 19
Choosing location - general remarks 19
Choice of location 19
Installation position 20
Wall mounting 21
Safety 21
Selecting wall plugs and screws 21
Mounting the Ohmpilot on the wall 21
Installation 23
Stripping lengths 23
Electrical connection 23
1-phase heating element up to 3 kW 24
Application example 1 24
3-phase heating element 900 W up to 9 kW 25
Application example 2 25
1-phase heating element up to 3 kW with heat pump control 26
Application example 3 26
Settings in the menu area 27
1-phase heating element up to 3 kW and external source 29
Application example 4 29
Settings in the menu area 30
Two heating elements - 3-phase and 1-phase 31
Application example 5 31
Settings in the menu area 32
Two 3-phase heating elements up to 9 kW 33
Application example 6 33
Settings in the menu area 34
1-phase heating element up to 3 KW / 3-phase heating element and circulation pump 35
Application example 7 35
Settings in the menu area 36
Establishing the data connection 38
Possible communication channels 38
3