EasyManua.ls Logo

Fronius Ohmpilot - Safety Rules; Explanation of Safety Notices; General Safety Guidelines

Fronius Ohmpilot
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety rules
Explanation of
safety notices
DANGER!
Indicates immediate danger.
If not avoided, death or serious injury will result.
WARNING!
Indicates a potentially hazardous situation.
If not avoided, death or serious injury may result.
CAUTION!
Indicates a situation where damage or injury could occur.
If not avoided, minor injury and/or damage to property may result.
NOTE!
Indicates a risk of flawed results and possible damage to the equipment.
General The device has been manufactured in line with the state of the art and according
to recognised safety standards. In the event of incorrect operation or misuse,
there is a risk of:
-
Serious or fatal injury to the operator or third parties
-
Damage to the device and other material assets belonging to the operating
company
All personnel involved in commissioning, maintenance and servicing of the device
must:
-
Be suitably qualified
-
Have knowledge of and experience in dealing with electrical installations
-
Read and follow these Operating Instructions carefully
In addition to the Operating Instructions, all applicable local rules and regula-
tions regarding accident prevention and environmental protection must also be
followed.
All safety and danger notices on the device:
-
Must be kept in a legible state
-
Must not be damaged
-
Must not be removed
-
Must not be covered, pasted or painted over
Only operate the device when all protection devices are fully functional. If the
protection devices are not fully functional, there is a risk of:
-
Serious or fatal injury to the operator or third parties
-
Damage to the device and other material assets belonging to the operating
company
Any safety devices that are not fully functional must be repaired by an author-
ized specialist before the device is switched on.
Never bypass or disable protection devices.
5

Table of Contents

Other manuals for Fronius Ohmpilot

Related product manuals