71
EN-US
Menu Items in the Setup Menu
Sequence of
menu items
The menu items of the Setup menu are described in ascending order.
You can scroll through menu items by pressing the 'Up' key.
OFFSET
* Once you have entered the 4-digit correction value, the navigation arrows switch
from 'up' and 'down' to 'left' and 'right.'
Use the 'Left' and 'Right' keys to move the decimal point to the desired location and
press the 'Enter' key.
CASH
Currency setting and rate for invoicing the
energy supplied
SLEEP LCD
Time value setting for the sleep mode
The display turns off after the time has ex-
pired to save battery power.
Correction value setting for the Total ener-
gy display
The correction value defined is added to
the power data sent by the inverters in the
'ALL TOTAL' display mode.
Unit MWh
Setting range + or - (sign) / 4-digit (correction value) / decimal point*
Factory setting 0
Unit -
Display range Currency / Charge rate/kWh
Factory setting EUR
Unit Minutes
Setting range 1 / 5 / 10 / NEVER
Factory setting 1
1 / 5 / 10 If no key is pressed, the display turns off after 1, 5 or 10 minutes.
The display is re-activated by pressing any key.
NEVER The display does not turn off in sleep mode.
To Next Page
Loading...
Need help?
General