Fronius TransTig 2200 User Manual

Basic setting
General The basic settings can be called up in the menu when TIG 2-step mode, TIG 4-step
mode or manual metal arc welding mode is selected.
Opening the
basic settings
1
Press Menu key
The main menu appears:
TIG main menu
Rod electrode main menu
2
Use the adjusting dial to select "Basic setting" (turn the adjusting dial)
3
Press the adjusting dial
The basic settings parameters appear:
The power source is now in the basic settings.
166

Fronius TransTig 2200 Specifications

General

Brand	Fronius
Model	TransTig 2200
Category	Welding System
Language	English