Page31
¾ Toselect th e802.11Mod e :
1. OntheAdvan cedSettingspage,locate theLe vel3section and clickthe802.11
Modelink.The802.11Modepagedisplays.
2. Select the2.4GHzWirelessModeasfollows:
Compatibility–Thisis thedefaultmodesetting,pro vid in g agoodbalanceof
performance
an dcompatibility withexistingwirele ssdevices.802.11b ,g,
and ndevicescanconnect.
Lega cy–Forolderwirelessdevices.Only802.11bandgdevicescanconnect.
802.11b(legacymode)willcauseyourwirelessne tworkto slow andis not
recommended.
Performance–Fornewerwireless802.11n deviceson ly.
Noot herdevices
canbeused.
3. Select the5GHzWirelessModeasfollows:
Nan dACMode–This is thedefaultsetting.Bo th802.11nand802. 11ac are
availableonthe5GHz fre quen cies.
NOn l y Mode–Th e5GHzfre quenciesare availableto802.11ndevices.
802.11acisnotenabled.
ACOnlyMode–This providesmaximumperformance.802.11acdeviceswill
haveexclusiveuseofthe5GHzfrequenciesand802.11ndeviceswillnotbe
able toconnectat5GHz.
4. ClickApplytosavethechanges .
OtherAdvanced WirelessOptions
Youcanvi e waddition alwirelessop tions.
¾ Tovie wtheo ptions:
1. IntheAdvancedSettingspage,lo cate theLevel 3sectionandclickOther
AdvancedWirelessOption slink.Awarningmessa gedisplays.
2. ClickOK.The Oth er Advan cedWire less Optionspagedisplays.
To Next Page
