Frontier FiOS-G1100 - Wireless Access Point Connection


Page48

2. Select theOnorOffradiobuttonintheAutoDetectionfield.
3. Tose tprivacy,selectthe Enabl ed checkbox.Thiscausesall devicesconnected
totheco ax i a l cabletousethesame p assword.Thisisrecommended.
4. Tose tthepassword,entertheCoaxLin kpasswordin 
thePassw ordfield.
5. Tose ttheCMratio,selecttheCMratioindropdown.
6. ToenableordisabletheCoaxlin k ,clickDisableorEnab le .
7. Toviewthedevicescon n e cted usingthecoaxi alcable,clickthe Go toWANCoa x
Stat s link.

HWSwitchPorts
¾ Toge ne rate thePortSettingspageand settheHWSwitchPorts:
1. IntheHWSwitch Portssection,ve rify theconnecti onstatusof the4Ethe rnet 
portsand1coaxport.
2. Toeditnetwork trafficpolicies,clicktheActio nicon.

Completeall Ethe rne t/Co axConnecti onCon figurationUpdat e s 
¾ Tosaveyourchange s:
1. ClickApply.

Wir el es s Ac c e ss PointConnection
AWirelessAccessPointne tworkconn ectionallowswirelessdevices toconnecttothelocal
are anetwork(LAN)usingthe2.4GHzor5GHzWi‐Fi network.
Note : On cedisabled,allwire lessdevicesconnecte dtothatwirelessnetworkwillbe
disconnectedfro mtheLANne tworkandInternet.
¾ Tovie wthecon nection:
1. IntheNetworkConne ctionspage,clickAdvan ced.