6.4 Selecting Options
6-25
Chap. 6 SELECTING PERIPHERAL EQUIPMENT
[ 2 ] Rail mounting bases
A rail mounting base allows any of the FRENIC-Mini series of inverter to be mounted on a DIN rail (1.38
in (35 mm wide)).
Table 6.17 Rail Mounting Base
Option model Applicable inverter type
FRNF12C1S-2U**
FRNF25C1S-2U**
FRNF50C1S-2U**
FRN001C1S-2U**
FRNF12C1S-7U
FRNF25C1S-7U
FRNF50C1S-7U
FRN001C1S-7U
FRNF12C1E-2U
FRNF25C1E-2U
FRNF50C1E-2U
FRN001C1E-2U
RMA-C1-0.75
FRNF12C1E-7U
FRNF25C1E-7U
FRNF50C1E-7U
FRN002C1S-2U**
FRN003C1S-2U**
FRNF50C1S-4U**
FRN001C1S-4U**
FRN002C1S-4U**
FRN003C1S-4U**
FRN002C1S-7U
FRNF50C1E-4U
FRN001C1E-4U
RMA-C1-2.2
FRN001C1E-7U
FRN005C1S-2U**
FRN005C1S-4U**
FRN003C1S-7U
FRN002C1E-2U
FRN003C1E-2U
FRN005C1E-2U
FRN002C1E-4U
FRN003C1E-4U
FRN005C1E-4U
FRN005C1E-4U
RMA-C1-3.7
FRN002C1E-7U
FRN003C1E-7U
Note 1: Asterisks (**) in the model names replace numbers which denote the following:
21: braking resistor built-in type; No number: standard type
The built-in braking resistor models are available for inverters of 2 HP or higher.
To Next Page
Loading...
