1.1 Features
1-7
Chap. 1 INTRODUCTION TO FRENIC-Mini
Flexible through optionals
• Function code copy function
The optional remote keypad includes a built-in copy facility, so you can copy function code data set in a
source inverter and duplicate it into a destination inverter.
• Inverter support loader software available
The inverter support loader program (Windows-based), which simplifies the setting of function codes, is
provided as an option.
Refer to Chapter 5, "RUNNING THROUGH RS-485 COMMUNICATION (OPTION)" for details.
• Mounting on DIN rail
Using the rail-mounting base (option), the inverter can easily be mounted on a DIN rail [1.38 inch (35 mm)
wide].
Refer to Chapter 6, "SELECTING PERIPHERAL EQUIPMENT" for details.
• Easy replacement of older models with new ones
Using the mounting adapter (option) makes it possible to mount the latest models without drilling any
additional holes.
Refer to Chapter 6, "SELECTING PERIPHERAL EQUIPMENT" for details.
• Remote operation
Using the optional RS-485 communications card and remote keypad together with remote operation
extension cable enables you to easily operate the inverter from a remote location, such as outside the
control panel where the inverter is installed.
Refer to Chapter 5, "RUNNING THROUGH RS-485 COMMUNICATION (OPTION)" and
Chapter 6, "SELECTING PERIPHERAL EQUIPMENT" for details.
Wide variations
The wide range of models available in the FRENIC-Mini series of inverters is certain to flexibly meet your
various system needs.
• The 460 V series is available in addition to the 230 V series (3-phase, single-phase).
• Models with built-in EMC filter and built-in braking resistors are also available.
•
An optional RS-485 communications card enables your system to feature network driven
management.
Refer to Chapter 8, "SPECIFICATIONS" for details.
Global products
FRENIC-Mini series of inverters are designed for use in global market in conformity with the global
standards listed below.
• All standard models conform to the EC Directive (CE Marking), UL standards (UL-Listed) and
Canadian standards (cUL-Listed).
All standard FRENIC-Mini inverters conform to European and North American/Canadian standards,
enabling standardization of the specifications for machines and equipment used at home and abroad.
• If a model with a built-in EMC filter is used, the model conforms to the European EMC Directive.
To Next Page
Loading...
