Fuji Xerox C7776 Administrator's Guide

Tools
118
Tools
5
System Settings Procedure
To change or customize the system settings, enter the System Administration mode.
This section describes the basic procedures for system settings.
The following shows the reference section for each procedure.
"Step1 Entering System Administration Mode" (P.118)
"Step2 Entering the System Administrator User ID and Passcode" (P.118)
"Step3 Selecting [Tools]" (P.119)
"Step4 Selecting a Setting Item on the [Tools] Screen" (P.119)
"Step5 Setting a Feature" (P.122)
"Step 6 Exiting System Administration Mode" (P.122)
Step1 Entering System Administration Mode
1 Press the <Log In/Out> button or the login information field on the touch screen.
Step2 Entering the System Administrator User ID and Passcode
To enter the system administration mode, enter the system administrator's user ID. If
[Passcode Entry for Control Panel Login] is set to [On] under [Tools] > [Authentication/
Security Settings] > [Authentication] > [Passcode Policy], you need to enter the passcode.
We recommend that you change the system administrator's user ID and passcode
immediately after installing the machine.
Reference
z
For more information on how to change the passcode, refer to "System Administrator Settings" (P.294).
123
456
789
0
＃
C

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English