Fuji Xerox C7776 Administrator's Guide

Appendix
628
Appendix
16
30 sheets
* : Based on when larger size paper is stacked on paper.
Important
z
When using 80 gsm paper
 Dimensions/Weight
Width 559 x Depth 448 x Height 246 mm, 12 kg
 Space Requirement (when connected to the main unit)
Width 1,036 X Depth 659 mm (main unit + Finisher-A1, when the extension tray and the
bypass tray are fully extended)
Finisher-B1 (Optional)
 Type
Sorting (Offset available)/ Stacking (Offset available)
 Paper Size/Paper Weight
z
Maximum: A3, 11 x 17"
z
Minimum: B5
*
z
60 to 220 gsm
* : Paper smaller than B5 is delivered to the center tray.
 Paper Capacity
Finisher tray
z
For paper not stapled:
A4: 2000 sheets, B4 or larger: 1,000 sheets, Mixed stack
*1
: 300 sheets
z
For paper stapled:
A4: 100 sets or 1000 sheets, B4 or larger: 75 sets or 750 sheets
z
Center binding/folding
*2
: 50 sets or 600 sheets
z
Folding
*2
: 500 sheets
*1 : When larger size sheets are stacked on top of smaller size sheets.
*2 : The Booklet Finishing function requires the optional Finisher-B1 Booklet unit. After a job with the Booklet Finishing function
specified has been output, the next job may not be delivered until the sheets are removed from the output tray. Also, if larger
size sheets are stacked on top of smaller size sheets after a job with the Booklet Finishing function specified has been run, the
next job may not be delivered until the sheets are removed from the output tray.
Note
z
When using 80 gsm paper
 Staple
z
Capacity:
A4: 50 sheets (90 gsm or less)
z
Paper Size:
Maximum: A3, 11 X 17"
Minimum:B5
z
Position:

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English