z
If you select [Low], image logs may not be created depending on the conditions
îš„ Resolution
Select the resolution of document images from [25dpi], [50dpi], [72dpi], [100dpi], or
[200dpi].
îš„ Page Range
Select the page range of document images from [First Page Only], [First 2 Pages], [First 3
Pages], [First 4 Pages], [First 5 Pages], or [All Pages].
Transfer Image Log
Image logs created on the machine can be transferred to a log management server for
storage and management. [Transfer Image Log] allows you to set how and when to
transfer image logs.
îš„ Log Transfer
Set whether or not to transfer an image log to a log management server with the Log
Transfer feature. Select from [Disabled] and [Enabled].
îš„ Assurance Level
Allows you to select an assurance level, which affects whether an image log is surely
transferred to a log management server, from [High] or [Low]. When [High] is set and if a
image log transfer fails, up to 2000 logs are saved in the machine as untransferred log.
When the number of untransferred logs saved in the machine exceeds 2000, the next job
will not be executed. While [Low] is set, the next job is executed and if the number of image
logs untransferred exceeds 2000, the logs are deleted in chronological order.
îš„ Logs To Transfer
Set whether or not to automatically transfer image logs to a log management server.
Select from [Pause], [Transfer Per Job Basis], and [Accumulate & Transfer].
If you select [Accumulate & Transfer], you can also select the timing of transferring in
[Transfer Timing].
îš„ Transfer Timing
Displays when [Accumulate & Transfer] is selected for [Logs to Transfer].
Specifies when to transfer image logs to a log management server.
Select from [Schedule Transfer], [At the end of the job], [At the end of selections], [At power
On], and [When maximum is reached].
Notify Job Completion by E-mail
You can receive the results of jobs performed by an e-mail notification.
To Next Page
Loading...
Need help?
General
