Tools
140
Tools
5
Tray 5 - Paper Size Defaults
Select the paper sizes displayed in the [Tray 5] screen in [Paper Supply] when copying with
Tray 5.
You can assign the paper size selected here to the buttons for [Standard Size] in the [Tray
5] screen.
If you frequently use non-standard size paper for copying, assigning the paper sizes to the
buttons will save your time to specify the size each time. For your convenience, set the
commonly used paper sizes in the upper level.
îš„ A/B Series Size
You can select a paper size from A and B series sizes.
îš„ Inch Size
You can select a paper size from inch series sizes.
îš„ Others
You can select a paper size from other sizes.
îš„ Custom Size
You can enter any size. Set the X width between 98 and 483 mm, and the Y length between
89 and 297 mm in 1 mm increments.
z
For envelopes, enter the size with the flap size excluded.
Auto Tray Switching Control
Set the alternative tray or paper when running out of paper loaded in the tray selected.
îš„ Auto Tray Switching
You can select from [Always Enable], [Enable during Auto Select], and [Enable for Same
Paper Type/Color].
When [Enable during Auto Select] is selected, the machine switches the tray when [Auto
Select] is selected in the [Copy] screen or [Paper Select] of the print driver.
z
The machine does not switch the tray automatically in the following cases:
z
Tray 5 is selected.
z
The tray set as [Auto Paper Off] is selected in [Paper Type Priority].
îš„ Targeted Paper Type (Copy Jobs)
You can select paper types.
When [According to Priority Assigned] is selected, the paper type is determined according
to the settings in [Paper Type Priority]. When selecting [Selected Paper Type Only], you can
specify the paper type.
îš„ Targeted Paper Color (Copy Jobs)
You can target all paper colors or only one paper color.
Image Quality
You can set the image quality and calibration settings.
To Next Page
Loading...
Need help?
General
