Tools
134
Tools
5
Services Home - Additional Features
Set the layout of additional feature buttons that appear on the Services Home screen.
z
If you do not want to display [Setup] as an additional feature button, select the [Show this in Admin mode]
check box. You can set or change settings with the machine only when it is in the System Administration
mode.
z
For more information on how to set the buttons, refer to "Customizing the Button Layout" (P.49).
Job Type on Job Status screen
Select the job types to be shown on the [Completed Jobs] screen under the [Job Status]
screen that is displayed when the <Job Status> button on the control panel is pressed.
Select from [All Jobs], [Printer & Print from Folder Jobs], [Scan, Fax, & Internet Fax Jobs], or
[Job Flow & File Transfer Jobs].
Default Language
You can select the language displayed on the machine.
There are two ways of selecting the language: set in the System Administration mode and
set by local users.
z
Setting in the System Administration mode
The language set here is the standard language that is retained even when the machine
is powered off and on.
z
Setting in the local users mode
The language setting in [Language] in the Services Home screen is lost when the
machine is powered off.
z
When [English] is selected, only ASCII characters can be used.
z
When you set [Language] to [English] on the Services Home screen and an address book entry or contents of
[Details] of Job Flow Sheets is entered in double-byte characters, the characters may not be displayed
properly.
z
When you use CentreWare Internet Services to import a CSV file* including double-byte characters other than
a selected language, the characters in the file may be garbled or the import may fail.
*: CSV (Comma Separated Values) is a file format that is often used for saving data by spreadsheets and
database programs.
Screen Brightness
You can adjust the screen brightness of the control panel between -16 and +16.
Reconfirm E-mail Recipient
Select whether or not to display the screen to confirm e-mail recipients when sending e-
mails.
Select from [Confirmation Not Required], [Always Reconfirm Recipient], and [Reconfirm if
Multiple Recipients].
To Next Page
Loading...
Need help?
General
