Common Service Settings
133
Tools
5
Screen Default
Set the screen displayed after powering on the machine or canceling the Power Saver
mode.
z
For more information on the setting procedure, refer to "Customizing the Control Panel" (P.29).
Screen After Auto Clear
Set the screen displayed after Auto Clear.
z
For more information on the setting procedure, refer to "Setting the Screen After Auto Clear" (P.31).
Auto Display of Login Screen
When the Authentication feature is enabled on the machine, set whether or not to
automatically display the login screen after turning on the machine or canceling the Power
Saver mode.
Custom Buttons 1 to 3
You can assign services such as Copy and Send from Folder to the custom buttons on the
control panel: Custom Button 1 to Custom Button 3.To leave a feature unassigned, select
[(Not Set)].
z
For more information, refer to "Assigning Services to the Custom Buttons" (P.72).
One-touch Buttons
Set the number of address numbers that are assigned to the one touch buttons.
îš„ Type 1
Assigns the one touch buttons 1 to 52 to the address numbers 0001 to 0052, and buttons
53 and 54 to the stored programming jobs 1 and 2.
îš„ Type 2
Assigns the one touch buttons 1 to 45 to the address numbers 0001 to 0045, and buttons
46 to 54 to the stored programming jobs 1 to 9.
z
When you select [Start Disabled], you cannot confirm the e-mail recipients in other Tabs.
Services Home
Set the layout of service buttons that appear on the Services Home screen.
z
For more information on how to set the buttons, refer to "Customizing the Button Layout" (P.33).
To Next Page
Loading...
Need help?
General
