Configuration of PDF/DocuWorks/XPS Signature
407
Encryption and Digital Signature Settings
13
2) Click [Security] to display the items in the folder.
3) Click [PDF/DocuWorks/XPS Security Settings] and configure the following settings.
z
The DocuWorks documents with DocuWorks signature are available on the following versions of DocuWorks
software.
z
When [SHA-1] is selected: DocuWorks 5.0 or later
z
When [SHA-256] is selected: DocuWorks 8.0 or later
z
PDF Signature
Select the setting for PDF signature from [Do not add signature], [Always add visible
signature], [Always add invisible signature], or [Select during send].
z
PDF Signature Hash Algorithm
Select the setting of the hash algorithm when using PDF signature from [SHA-1] or [SHA-
256].
z
DocuWorks Signature
Select the setting for DocuWorks signature from [Do not add signature], [Always add
signature], or [Select during send].
z
DocuWorks Signature Hash Algorithm
Select the setting of the hash algorithm when using DocuWorks signature from [SHA-1]
or [SHA-256].
z
XPS Signature
Select the setting for XPS signature from [Do not add signature], [Always add signature],
or [Select during send].
4) Click [Apply].
Step2 Configuration on the Computer
z
Sending a DocuWorks security certificate file from the machine to a computer
You must register a personal certificate as the destination on the machine, and then
register the certificate on the Address Book. When you register a personal certificate on
the machine, include the root certificate in the personal certificate.
z
To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the Internet. The communication fee shall be borne by you.
z
Sending a PDF, DocuWorks, or XPS signature file from the machine to a computer
Make sure that the root certificate of the certificate to be used for the scan file signature
of the machine is registered on the recipient's computer.
To Next Page
Loading...
Need help?
General
