Fuji Xerox C7776 Administrator's Guide

Tools
180
Tools
5
 RARP
The address, subnet mask, and gateway address will automatically be set via RARP.
 DHCP/AutoIP
The address, subnet mask, and gateway address will automatically be set via DHCP/AutoIP.
If the machine fails to communicate with the DHCP server, the AutoIP function is
automatically enabled and an IP address (169.254.XXX.XXX) is assigned to the machine.
When communication between the machine and the DHCP server recovers, the machine
obtains an IP address, a subnet mask, and a gateway address by the DHCP server.
 STATIC
Allows you to manually specify an IP address, a subnet mask, and a gateway address.
Note
z
To configure a subnet mask and a gateway address, an IP Address must be set first.
 IPv4 - IP Address
Enter the IP address using the keyboard displayed or the numeric keypad when selecting
[STATIC] at [IPv4 - IP Address Resolution].
Note
z
Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from of 0 to 255.
z
Specify an IP address using numbers (0 to 9) and periods (.). If you mistyped a character on the screen, select
[Backspace] to delete the character.
 IPv4 - Subnet Mask
Enter the subnet mask using the keyboard displayed or the numeric keypad when selecting
[STATIC] at [IPv4 - IP Address Resolution].
Note
z
Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from of 0 to 255.
z
Specify a subnet mask using numbers (0 to 9) and periods (.). If you mistyped a character on the screen,
select [Backspace] to delete the character.
 IPv4 - Gateway Address
Enter the gateway address using the keyboard displayed or the numeric keypad when
selecting [STATIC] at [IPv4 - IP Address Resolution].
Note
z
Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from of 0 to 255.
z
Specify a gateway address using numbers (0 to 9) and periods (.). If you mistyped a character on the screen,
select [Backspace] to delete the character.
 IPv4 - DNS Server Setup
Set the DNS server.
 Get IP Address from DHCP
Set whether or not to automatically obtain the address of the DNS server from the DHCP
server.
 Preferred DNS Server IP Address, Alternate DNS Server 1 IP Address, Alternate
DNS Server 2 IP Address
When [Get IP Address from DHCP] is set to [Disabled], manually set the DNS server address.
Specify alternate DNS server addresses for [Alternate DNS Server 1 IP Address] and
[Alternate DNS Server 2 IP Address].

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English