Setup
267
Tools
5
îš„ New Recipient
Specify a new address. The address specified appears in [Name/E-mail] in the [Send E-mail]
screen.
îš„ Name/E-mail Address
îš„ Subject
Enter a subject using the keyboard displayed.
îš„ Delete Recipient
Deletes all information for the selected recipient information.
îš„ Edit
Displays the [Edit Recipient] screen, which allows you to check or change the recipient
selected.
z
For more information on the [Edit Recipient] screen, refer to "Scan" in the User Guide.
îš„ File Format
Select an output file format.
z
For more information on the [File Format] screen, refer to "Scan" in the User Guide.
îš„ Resend Attempts
Set whether or not to try sending again if a transmission fails. If you select [On], set the
number of resend attempts and interval.
îš‹
Resend Attempts
Set the transmission retry count from 1 to 5.
îš‹
Resend Interval
Set the transmission retry interval from 30 to 300 seconds.
îš„ Encryption
Set whether or not to encrypt the e-mail transmission.
z
To encrypt e-mail transmission, the configuration of S/MIME is required.
z
To encrypt e-mail transmission, a certificate is required.
z
To enable encryption, select [On] before specifying an address. [On] will be disabled after an address is
specified.
îš„ Digital Signature
Select whether or not to add digital signature.
z
To add digital signature, the configuration of S/MIME is required.
z
To add digital signature, a certificate is required.
Transfer via FTP (1), Transfer via FTP (2)
Specify where FTP forwarding is to be stored.
[Transfer via FTP (2)] will be displayed when [Transfer via FTP (1)] is configured.
To Next Page
Loading...
Need help?
General
