Fuji Xerox C7776 Administrator's Guide

Problem Solving
614
Problem Solving
15
5 Pull up the metal part of the staple cartridge as shown in the illustration.
6 Remove the jammed staples (1), and then return the metal part pulled up in step 5 to the
original position (2).
7 Push the staple cartridge into the machine until it clicks into place.
8 Close the finisher front cover.
Note
z
If the finisher front cover is not completely closed, a message will appear and the machine remains paused.
CAUTION
z
Be careful in removing jammed staples.

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English