Appendix
700
Appendix
16
îš„ Relay Broadcast
The machine has the function of an initiating station but does not have the function of a
relay station.
The machine does not support G4 communications, but if a relay station supports G4
communications, the machine can select a G4 communication function that a relay station
performs as an instruction for relay broadcast.
îš„ Features Supported by F Code Communication
F Code communication supports the following features: the Send Fax - Remote Folder,
Secure Polling, Store File - Local Folder, Relay Broadcast, and Remote Relay Broadcast
features.
îš„ Fax Immediate Reception
If the machine’s memory capacity becomes insufficient to receive fax data, the machine
automatically switches into immediate reception mode. In this mode, the machine outputs
received documents on a page-by-page basis; each document page is output immediately
after the machine finishes receiving it. However, if the machine receives large data, such as
an A3 size photo with many halftone levels, the machine may not print it even after the
machine finishes receiving it. In that case, press the <Stop> button, or turn the machine off
and then on again, to have the machine print the document.
îš„ Skip Blank Pages Feature
The accuracy of detecting blank pages depends on the status of the page. For example, if a
blank page background shadows, the machine may not determine the page as a blank.
îš„ Address Type Settings When Registering on the Address Book
The following address types can be selected when you add an address to AddressBook:
Fax, IP Fax (SIP), Internet Fax, E-mail, and Server (FTP/SMB)
When you register an address on the Address Book, select an address type in accordance
with the service. The address book entry registered with the wrong address type cannot be
selected from the original service.
îš„ Simple Fax
z
While you are making the settings for [Fax/Internet Fax], you cannot switch to the
[Simple Fax] screen. To switch to the [Simple Fax] screen, you must return to the Services
Home screen. Once you return to the Services Home screen, the settings you have made
will be cleared.
z
You can re-enter a recipient after entering the recipient to prevent sending a fax to a
wrong address.
z
You cannot use address numbers to specify recipients for Broadcast Send, group dial
numbers, the Address Book, and wildcards.
îš„ Printer Lockout
If the power is switched off when both [Set Lockout Duration] and [Allow User to Lock Out]
are selected in [Printer Lockout], the manually configured [Lock Out Printer] setting is
cleared. If the power is switched on again, [Set Lockout Duration] will be effective
regardless of the [Lock Out Printer] setting.
îš„ Activity Report
z
The number of a smart card cannot be displayed.
To Next Page
Loading...
Need help?
General
