Fuji Xerox C7776 Administrator's Guide

Replacing Consumables
77
Maintenance
3
4 Pinch both sides of the empty staple case with your fingers (1), and remove the staple case
from the cartridge (2).
5 Insert the front side of the new staple case into the staple cartridge (1), and then push the
rear side into the cartridge (2).
6 Push the staple cartridge into the finisher until it clicks into place.
7 Close the finisher front cover.
Note
z
If the finisher front cover is not completely closed, a message will appear and the machine will remain
paused.

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English