Fuji Xerox Color 550

Registering/Deleting/Renaming Stored Programs
177
Stored Programming
5
Notes and Restrictions on Registering Stored Programs
The following notes and restrictions applies when you register stored programs.
z
When registering a stored program to select a paper size or type loaded on the
bypass tray, register both the paper size and the paper type. If only the paper size or
type is registered, the stored program may not be called properly.
z
If any of the following operations is performed while a stored program is being
registered, the stored program may not be registered or may not work correctly.
- Removing or inserting a paper tray
- Loading or reloading paper in the bypass tray
z
If any of the following operations is performed after a stored program is registered,
the registered stored program may not be called properly.
- If the stored program has the Watermark feature and the default values of that
feature are changed.
- If the settings of the control panel are changed.
- If the services assigned to the <Custom> buttons are changed.
- If any setting is changed under [Tools] > [System Settings] > [Copy Service
Settings] > [Preset Buttons].
- If any optional components installed on the machine, such as a finisher, are
changed, and thereby the associated buttons become no longer available.
- If the measurement unit, millimeters or inches, is changed.
z
The following features and operations cannot be registered in Stored Programming.
- Registration and call of a stored program
- System Settings
- The [Network Scanning] button on the [Services Home] screen.
- The <Custom> button to which the Network Scanning service is assigned.
- Unselectable buttons
- The [Language] button on the [Services Home] screen
- The [Screen Brightness] button on the [Services Home] screen
- Selecting items using the scroll bar
- The <Energy Saver> button
z
A stored program registration is canceled when the <Interrupt> button is pressed, the
Auto Clear feature causes a time-out, or a pop-up window (such as a paper jam
window) appears.
Registering Stored Programs for Build Job
Up to 100 actions can be registered with one stored program for Build Job. Up to 40
stored programs can be registered in the machine.
The following describes how to register actions with stored programs.
1 Select [Store Build Job].