Fuji Xerox Color 550

3 Copy
96
Copy
3
[Starting & Ending Page] Screen
This screen allows you to set the starting and ending pages to be copied.
1 Set [Starting Page] and [Ending Page].
Starting Page
z
[Left Page] / [Right Page]
You can select these options when [Left Page then Right] or [Right Page then Left]
is selected.
z
[Top Page] / [Bottom Page]
You can select these options when [Top Page then Bottom] is selected.
Ending Page
z
[Left Page] / [Right Page]
You can select these options when [Left Page then Right] or [Right Page then Left]
is selected.
z
[Top Page] / [Bottom Page]
You can select these options when [Top Page then Bottom] is selected.
Original Size (Specifying the Scan Size for the Document)
This feature allows you to specify the scan size for a document.
Use this feature when a document is a non-standard size, or when you want to copy a
document at a size different from the original size. You can also add margins, or delete
unnecessary margins using this feature.
1 Select [Original Size].
2 Select the size of the document.
If you select a non-standard size, specify
values for the X and Y directions.