Power Source
43
Product Overview
2
2 Press the power switch to the [ ] position.
Important • Power off processing is performed
internally on the machine for a while after
the power is switched off. Do not switch
the main power off immediately after
switching the power off.
Note • When powering the machine on after it
has been switched off, wait 15 seconds
after the touch screen has gone dark.
Switching the Main Power Off
The following describes how to switch the main power off.
Important • Do not switch the main power off while the touch screen displays a screen or the <Energy
Saver> button blinks. Switching off the main power may damage the hard disk and the
memory or cause a machine malfunction.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord
with the main power on may damage the hard disk and the memory or cause a machine
malfunction.
1 Make sure that the power is switched off.
2 Make sure that the touch screen is blank and the <Energy Saver> button is not lit.
3 Open the front cover.
4 Press the main power switch to the [ ]
position to switch the main power off.
The <Main Power> indicator goes out on the
control panel.
5 Close the front cover.
To Next Page
Loading...
Need help?
General
