Fuji Xerox Color 550

Safety Notes
19
Before Using the Machine
1
If the circuit does not work properly, contact your local Fuji Xerox
representative.
Do not attempt to remove a paper jammed deeply inside the product,
particularly a paper wrapped around a Fusing Unit or a heat roller. Otherwise,
it may cause injuries or burns. Switch off the product promptly and contact your
local Fuji Xerox representative.
Never touch the paper output area of the finisher during operation. It may
cause injuries.
Be careful in removing jammed staples.
Be careful not to get injured by waste staples when detaching a staple dust
box.
Waste staples may come out with output paper. Be careful not to get injured
by the staples.
テストボタン
ブレーカースイッチ
Breaker switch
Test button
Breaker switch
Color 550/560 Printer main unit A4 High Capacity Feeder
TEST button
Breaker switch
TEST button
Breaker switch
TEST button
Interface module
Breaker switch
TEST button
High Capacity Feeder C1-DS
Breaker switch
TEST button
Finisher D4, Finisher D4 with Booklet Maker