Control Panel
51
Product Overview
2
Assigning Features to <Custom> Buttons
You can assign services to the <Custom 1> to <Custom 3> buttons on the control
panel.
By assigning services to the <Custom> buttons, you can switch to these services
without returning to the [Services Home] screen. If you do not want to assign any
services to a button, select [(Not Set)].
Note • By factory default, [Copy] is assigned to the <Custom 1> button and [Review] is assigned to
the <Custom 3> button. No service is assigned to the <Custom 2> button.
For information on how to assign features, refer to "1 Before Using the Machine" > "Customizing the
Control Panel" > "Assigning Services to <Custom> Buttons" in the Administrator Guide.
To Next Page
Loading...
Need help?
General
