Fuji Xerox DocuCentre-IV 3060

3 Copy
128
Copy
3
z
Finisher-B1
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled
in the orientation shown in the above table.
Paper Size and Punching Position (Finisher-B1)
z
2 holes*
1
*1 : For the Finisher-B1, the distance between the two holes is 70 mm with the US 2/3 Hole Punch Kit, and is 80 mm
with the 2/4 Hole Punch Kit, which is normally used.
z
3 holes
z
4 holes
1 Staple
(Left)
1 Staple
(Right)
2 Staples
(Left)
2 Staples
(Top)
2 Staples
(Right)
A4 , B5 ,
7.25
× 10.5" ,
8
× 10" ,
8.5 × 11" , 16K
A4, A3, B4,
8.5
× 11",
8.5
× 13",
8.5 × 14",
11
× 15",
11
× 17", 8K
2 Holes
(Left)
2 Holes
(Top)
2 Holes
(Right)
A4 , B5 , 7.25 × 10.5" , 8 × 10" ,
8.5
× 11" , 16K
A4, A3, B4, 8.5 x 11", 8.5 × 13",
8.5
× 14", 11 × 15", 11 × 17", 8K
3 Holes
(Left)
3 Holes
(Top)
3 Holes
(Right)
A4 , B5 , 7.25 × 10.5" , 8 × 10" ,
8.5
× 11" , 16K
A3, B4, 11 × 15", 11 × 17", 8K
4 Holes
(Left)
4 Holes
(Top)
4 Holes
(Right)
A4 , B5 , 7.25 × 10.5" , 8.5 × 11" , 16K
A3, B4, 11
× 15", 11 × 17", 8K
*
*
*
*