3 Copy
84
Copy
3
For information on the settings to use the Envelope Tray, refer to "5 Tools" > "Common Service
Settings" > "Other Settings" > "Tray 1 Configuration", and "Common Service Settings" > "Paper Tray
Settings" > "Paper Tray Attributes" in the Administrator Guide.
For information on envelope sizes that can be loaded in the Envelope Tray, refer to "5 Tools" >
"Common Service Settings" > "Other Settings" > "Paper Size Settings" in the Administrator Guide.
Important • The Envelope Tray can only be used in place of Tray 1. The standard Tray 1 cannot be used
when the Envelope Tray is used.
% Full
Displays the remaining amounts of paper loaded in trays.
Size
Displays paper sizes.
Type
Displays paper types.
Color
Displays paper colors.
For information on how to set, refer to "5 Tools" > "Common Service Settings" > "Paper Tray Settings" >
"Paper Tray Attributes" in the Administrator Guide.
Size Detection
Displays how the machine detects a paper size.
For information on how to set, refer to "5 Tools" > "Common Service Settings" > "Other Settings" >
"Paper Size Settings" in the Administrator Guide.
[Tray 5] Screen
Set the paper loaded in Tray 5.
The [Tray 5] screen appears when you load paper.
For information on papers that can be loaded, refer to "2 Paper and Other Media" > "Paper Types" in the
Administrator Guide.
1 Select a paper size and a paper type.
Note • Select [ ] to return to the previous
screen or [ ] to move to the next screen.
• [Auto Detect] is available only when
standard sized paper is loaded.
Paper Size
Select from [Auto Detect], [Standard Size], and [Custom Size].
When you select [Auto Detect], the paper size is identified automatically.
When you select [Standard Size] or [Custom Size], refer to "When [Standard Size] is Selected" (P.85) or
"When [Custom Size] is Selected" (P.85), respectively.
Paper Type
Select a paper type.
To Next Page
Loading...
