FujiFilm APERTO Lucent - Starting the System

Q2ec-FM00493
Press the GANTRY button.
The button lights up and the MRI unit turns on.
The window shows the startup progress.
1
2
Press the CPU button on the switch
unit.
The button lights up.
Switch unit
CPU button
GANTRY button
3
Make sure that startup has finished.
When startup finishes, both CPU READY and
MR READY on the switch unit light up and the
Launcher appears in the window.
Starting up takes about four minutes.
Operation window
Launcher
3
1
2
Chapter 2 Starting the System
2.1 Starting the system