System expan sio ns
Install the cross-piece
2
2
1
► Fit the cross-piece and connect the fan cables.
► Fold the cross-piece down (1 ) and make sure that the c atches engage in
the openings provided for them (2).
Make sure that no cables become pinched.
► Install the hood.
► Secure all the cables previously detached.
► If a type 2 board was installed and it was secured to the cross-piece, install the latter
again (see "
Remove and install type 2 boards", Page 69).
Fujitsu Technology Solutions 67
To Next Page
Loading...
