Fujitsu ETERNUS DX100 S3 - Page 68

• For outlet ´ 16
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
Controller enclosure
Drive enclosure 5
Drive enclosure 4
Drive enclosure 3
Drive enclosure 2
Drive enclosure 1
: Connect OUTPUT#0-n of the power distribution unit to the PSU#0 inlet of the ETERNUS DX Disk storage system.
: Connect OUTPUT#1-n of the Power distribution unit to the PSU#1 inlet of the ETERNUS DX Disk storage system.
Power distribution
unit #1
Power distribution
unit #0
PSU#1 Inlet
PSU#1 InletPSU#0 Inlet
PSU#0 Inlet
PSU#2 Inlet
PSU#3 Inlet
3 Use the power cord clamps to prevent the power plugs from coming unplugged.
Attach the power cord clamps removed in Step 1.
Chapter 4
Connecting Cables
4.4 Power Cord Connection
68
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0