Fujitsu ETERNUS DX100 S3 - Page 69

4 Connect the plugs on the other end of the power cords (AC input cables) that are attached to the power
distribution unit to sockets.
Power supply failure can be prevented by connecting the power cords (AC input cables) on the power
distribution unit #0 side and the power distribution unit #1 side to different power sources.
Connect to power outlets.
AC input cables
Power
distribution
unit#1
Power
distribution
unit#0
Chapter 4 Connecting Cables
4.4 Power Cord Connection
69
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0