(2) Click the [OK] button.
The password is changed and the change completion screen appears.
(3) Click the [Done] button.
The [Set Thin Provisioning] screen appears.
4 Set the Thin Provisioning.
Enable or disable the Thin Provisioning function and set the maximum pool capacity.
(1) Set the required items and click the [Next >>] button.
A confirmation screen appears.
(2) Click the [OK] button.
The Thin Provisioning is set and the change completion screen appears.
(3) Click the [Done] button.
The [Register Advanced Copy License] screen appears.
Chapter 5
General Settings
5.4 Storage Management (Initial Setup 1)
80
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
