Fujitsu ETERNUS DX100 S3 - Page 79

(1) Set the required items and click the [Next >>] button.
A confirmation screen appears.
(2) Click the [OK] button.
The name of the ETERNUS DX Disk storage system is set and the setting completion screen ap-
pears.
(3) Click the [Done] button.
The [Change User Password] screen appears.
3 Change the user password.
Change the user password.
(1) Set the required items and click the [Next >>] button.
A confirmation screen appears.
Chapter 5
General Settings
5.4 Storage Management (Initial Setup 1)
79
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0