Working w ith the notebook
Installing a module
► Place the modu le into the m odule bay so that the contacts enter first.
► Push the module into the module bay until you feel it locking into place.
Optical drive
Opticaldrive
This product contains a light emitting diode, classified in accordance w ith IEC
8251:1993: LASER CLASS 1, and must therefore not be opened.
Handling data c arriers
Handling
Observe the following guidelines when handling data carriers:
• Avoid touching the s urface of a data c arrier. O nly handle data carriers by their edges.
• Always store data carriers in their cases. This will protect the data carrier against
being covered in du st, scratched or damaged in any other way.
• Protect your data carriers against dust, mechanical v ibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm data carriers in the optical drive.
When using a data carrier of lesser quality, vibrations and reading errors may occur.
36 Fujitsu Technology Solutions
To Next Page
Loading...
