Fujitsu Lifebook S760 - Password Protection for Booting of the Operating System

Security functions
Setting supervisor and user password
► Start the BIOS Setup Utilit y and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.

With Enter new Password: you are asked to enter a password.
► Enter the password and press the Enter key.

Confirm new Password requires you to confirm the password.
► Enter the pa ssword again and press the En ter key.

Changes have been saved is a confirmat ion that the new password has been saved.
► To set the user pa ssword, select Set User Password and proceed exactly as
when con figuring the supervisor password.

If you do no t want to change any other se ttings, you can exit BI OS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSupervisor passwor
d
Userpassword

The notebook w ill be rebooted and the new password will come into e ffect. It will now be
necessary to first enter your supervisor or user password in order to open the BIOS Setu p U tility.
Please n ote that the user password only pro vides access to a few of the BIOS settings.
Changin g the s up e r vi so r or user pas sw o rd
You can only change the supervisor passwo rd when you have logged into the
BIOS Setup Utility with the supervisor password.
PasswordSupervisorpasswordUserpassword
► Call the BI OS Setup Utility andgototheSecurity menu.
► When changing the password, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a new password) pe rform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Setup Utilit y and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.

You will be r equested to enter the current password by the Enter Current Password prompt.
You will be req uested to enter a new password by the Enter New Password prompt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.

The notebook will now reboot with the password removed.
Removing the supervisor password simultaneously deactivates the user password.
Password protection for booting of the operating system
With the s upervisor passw ord y ou have set in
the BIOS Setup Utility (see
section "
Setting superv isor and user pa ssw
ord", Page 48), you can also
prevent booting of the operating system.
Ope
rating sys tem
54 Fujitsu Technology Solutions