Connecting external d evices
Connecting external devices
Always refer to the safety information provided in "Important notes", Page 6 before
connecting or disconnecting any devices to or from your notebook.
Always read the documenta tion supplied w ith the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the steps below in order, when connect ing or disconnecting
devices to your notebook:
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before c onnecting/disconn ecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the extern al device.
Some of the external devices require s pecial drivers (see the operating
system and external device documentation).
Connecting devices to the noteboo k
1. Turn off your no tebook an d all external devices.
2. Unplug your notebook and al
l devices from the mains sockets.
3. Connect t he cables for your external devices following the instructions.
4. Plug all power cables into t
he mains sockets.
DevicesPer ipheralde
vices
Disconnecting devic es from the notebook
1. Turn off your no tebook an d all external devices.
2. Unplug your notebook and all dev
ices from the mains sockets.
3. Disconnect the cables for your external devices follow ing the instructions.
DevicesPer ipheraldevices
60 Fujitsu Technology Solutions
To Next Page
Loading...
