Removing and installing components
during servicing
Removing and installing the har
ddisk
Removing a cover
1
2
► Remove the screws (1).
Keep the screw s in a safe place. If you are removing more than one component at
the same time, store the screws for t he individual components separate from each
other. If you install the wrong screws, components may be damaged.
► Lift the cover off the notebook (2).
Removing a hard disk
1
2
► Remove hard disk fixture (1).
► Lift the har
d disk out of the hard disk compartment (2).
74 Fujitsu Technology Solutions